Steel moulds for wall three-layer reinforced concrete panels
Wall three-layer reinforced concrete panels are designed to serve as external facade systems of both residential and public multi-storey buildings.
They are basically monolithic sandwich panels consisting of external, internal, and medium (insulating) layers. There are also additional external and internal finishing layers and layers made of rolled and film materials.
The external and internal layers are connected with steel rebar, which makes the finished product solid and durable. The insulating layer may be made of polystyrene foam or its substitutes, but the most popular insulation material is mineral wool. These panels may be either load-bearing or non-load-bearing, depending on the planned structural behaviour of outer walls of the building. The structure becomes monolithic during the moulding of the product.
M-Konstruktor's steel moulds for wall three-layer reinforced concrete panels
Steel moulds for 3-layer wall slabs are manufactured with various dimensions and having a grade depending on the types and dimensions of a finished product.
The moulds are equipped with a blockouts for windows and doorways. Upon the request the pans for moulds can be disassembling for easy transporting.
A quality of finished slabs depends on the quality of a steel moulds, reinforcement, concrete and all other equipment needed for their fabrication. The M-Konstruktor plant is manufacturing steel moulds for an external 3-layer wall slabs according to all GOST requirements.
It is possible to request for an additional equipment such as length and width cutters, magnetic or embedded sides.
The moulds are equipped with a blockouts for windows and doorways.
They can be optionally equipped with length and width cutters, magnetic or embedded sides.
The pans can be disassembling for easy transporting.
The M-Konstruktor plant mastered production of steel moulds for 3-layer wall slabs of any standard dimensions.
Perfectly smooth moulding surfaces provides a perfect concrete product surface.
The M-Konstruktor plant is manufacturing steel moulds for an external 3-layer wall slabs according to all GOST requirements.
Additional equipment upon the request
Length and width cutters, magnetic or embedded sides are available options.